# tar1090

Provides an improved dump1090-fa webinterface

- Improved adjustable history
- Show All Tracks much faster than original with many planes
- Multiple Maps available
- Map can be dimmed/darkened
- Multiple aircraft can be selected
- Labels with the callsign can be switched on and off

See the bottom of the page for screenshots

### Installation / Update:

```
sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/tar1090/master/install.sh)"
```

## View the added webinterface

Click the following URL and replace the IP address with address of your Raspberry Pi:

http://192.168.x.yy/tar1090

Check further down or keyboard shortcuts.

## Configuration (optional):

Edit the configuration file to change the interval in seconds and number of history files saved:
```
sudo nano /etc/default/tar1090
```
Ctrl-x to exit, y (yes) and enter to save.

Apply the configuration:
```
sudo systemctl restart tar1090
```

The duration of the history in seconds can be calculated as interval times history_size.

## Configuring the web interface (optional):

```
sudo nano /usr/local/share/tar1090/html/config.js
```

Ctrl-x to exit, y (yes) and enter to save.
Then Ctrl-F5 to refresh the web interface in the browser.

## Enable (/disable) FA links in the webinterface (previously enabled by default)

```
# ENABLE:
sudo sed -i -e 's?.*flightawareLinks.*?flightawareLinks = true;?' /usr/local/share/tar1090/html/config.js
# ENABLE if the above doesn't work (updated from previous version)
echo 'flightawareLinks = true;' | sudo tee -a /usr/local/share/tar1090/html/config.js
# DISABLE:
sudo sed -i -e 's?.*flightawareLinks.*?flightawareLinks = false;?' /usr/local/share/tar1090/html/config.js
```

Then Ctrl-F5 to refresh the web interface in the browser.

## UAT receiver running dump978-fa and skyaware978:

This is the relevant part in the configuration file:
```
# Change to yes to enable UAT/978 display in tar1090
ENABLE_978=no
# If running dump978-fa on another computer, modify the IP-address as appropriate.
URL_978="http://127.0.0.1/skyaware978"
```
Open and save as described above in the Configuration section.
Follow the instructions in the file.

### Installation / Update to work with another folder, for example /run/combine1090

```
wget -q -O /tmp/install.sh https://raw.githubusercontent.com/wiedehopf/tar1090/master/install.sh
sudo bash /tmp/install.sh /run/combine1090
```

## Remove / Uninstall

```
sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/tar1090/master/uninstall.sh)"
```

## Keyboard Shortcuts


- Q and E zoom out and in.
- A and D move West and East.
- W and S move North and South.
- C or Esc clears the selection.
- M toggles multiselect.
- T selects all aircraft
- B toggle map brightness


## Screenshots
![Screenshot1](https://raw.githubusercontent.com/wiedehopf/tar1090/screenshots/screenshot1.png)
![Screenshot2](https://raw.githubusercontent.com/wiedehopf/tar1090/screenshots/screenshot2.png)

## nginx configuration for dump1090-fa

If you are using another /run directory like /run/dump1090-fa, just change the path.

```
location /tar1090/data/ {
  alias /run/dump1090-fa/;
}

location /tar1090/chunks/ {
  alias /run/tar1090/;
  location ~* \.gz$ {
    add_header Cache-Control "must-revalidate";
    add_header Content-Type "application/json";
    add_header Content-Encoding "gzip";
  }
}

location /tar1090 {
  try_files $uri $uri/ =404;
  alias /usr/local/share/tar1090/html/;
}
```

If you are using another dump1090 fork, change `/run/dump1090-fa` in this section:
```
location /tar1090/data/ {
  alias /run/dump1090-fa/;
}